Other Audio Experiments

Audio

We hear tones and music. The tone is a signal that changes with time.

We can generate a sequencies of values and play the sequence spaced by a time interval.

For Telephony, it was typically 8000 samples per second, so the samples would be spaced 125 micro-seconds apart.

Typically, the samples are supplied to a hardware audio card, that outputs the samples to the audio output and then onto an amplifier to a headphone or speaker.

Is it possible to generate the samples for a modem?

Yes -

• Establish a connection from one computer to another.
• It is going to use a telephone call.
• Establish the telphone call so that there is an audio path
• Both ends can speak and hear at the same time
• it is best if they take turns
• open file with text
• serialize the text in the file
• read the characters from the file
• convert each character to a squence of bits that change at a set bit rate
• send a tone selected by the value of the bit.
• send this signal over the telephone circuit.

http://www.dougrice.plus.com/dougnapTheory/index.htm has some notes of using a telphone circuit.

• The receiving circuit has to listen for the signals
• What is the strongest signal?
• Is this a '1' or '0'
• use a UART to sample this stream of '1' and '0' to
• The UART emits received characters to the computer program,
• The computer program reads the caharcter from the UART.
• Display the characters or copy them into a file.
• inform the user if the telephone call hangs up.

Other Experiments

Over the years experiments in generating audio have been tried.

At School we were told about this:

 X = X + Y*N
 Y = Y - X*N

Itterate them and you get nice Sine and Cosine waves. What is remarkable is the amplitude seems stable over a long time.

http://www.dougrice.plus.com/rt004/sr3/sine.htm and http://www.dougrice.plus.com/indexPics.html has links.

Using C to Write to a WAV file

https://mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html - Useful webpage that explains the format of WAV files.

http://www.dougrice.plus.com/dev/wav.c It is possible to use a C program to write a WAV file and play it with media player.

https://gasstationwithoutpumps.wordpress.com/2011/10/08/making-wav-files-from-c-programs/ may be clearer.

DTMF expriment using SVG

http://www.dougrice.plus.com/dev/dtmfCode/dtmf1_g.svg

Using Caller Display for a short message service

At the early days of the dial up internet, before spammers, I had an idea to send the number of unread emails to a caller display device.

At the time, emails were available using dial-up internet. It would be nice to know if you had unread emails.

http://www.dougrice.plus.com/dev/modem.cpp - from 1997 when I could play out a file using my Sound Blaster with DOS utilities.

http://www.dougrice.plus.com/dev/modem_caller_display.cpp - Using this program and an additional circuit, it was possible to send text to a phone that supports CDS Caller Display. The additional did the line reversal. This damaged my PC's audio. Caller Display uses a signal bases on V.23 sending at 1200 baud.

It would have been possible send a short message to a caller display phone.

It needed:

• A No Ring call - This enabled a phone call to do the Caller display Line reversal, and open the speech path end to end.
• The caller display phone to store the TEXT bit of the clip, which they did not do, due to lack of memory.
• The caller display phones displayed as little as 14 characters.
• The dial up email to be free from spammers

Further information https://niccstandards.org.uk/publications/nd1001-1099/ on signalling standards

A Webpage to explore AutoCorellation used in eCall

We did AutoCorellation at college.

http://www.dougrice.plus.com/dev/auto5.html - eCall 3GPP TS 26.267 V13.0.0 (2015-12)

https://itecspec.com/archive/3gpp-specification-ts-26-268/ - This has a test harness that is worth a try.

The eCall spec and reference modem code is available on line.

https://www.etsi.org/deliver/etsi_ts/126200_126299/126267/16.00.00_60/ts_126267v160000p.pdf - Spec

https://www.etsi.org/deliver/etsi_ts/126200_126299/126268/08.00.00_60/ts_126268v080000p.pdf - C code for the modem and test harness. There is a zip file in the same folder.

The reference code has a test harness that is easy to build on a Raspberry Pi and PC using Tiny C.

What impressed me is that the zip file has Test harness.

It does not contain the executable.

There is a make file.

You build the code and then run the test harness.

If you can build the code, the test harness passes the tests supplied.

The code has beed delivered to you.